REQUIRED DECAL PLACEMENT 

 

 

SODA Series Decals 

Each car shall have two Series decals, on both sides of the car, positioned below the A-pillar location on truck, buggy or UTV bodies. Racers are not required to cover up other series decals if they are running other series during the same season.   

 

Presenting Sponsors Decals 

Each car shall have Presenting Sponsors decals, on both sides of the car, positioned below the A-pillar location on truck, buggy or UTV bodies.   

 

TITLE SPONSOR Windscreen Banner  

The Series TITLE Sponsor’s windscreen banner decal must be displayed: primarily centered on the top portion of the windscreen.   

 

The secondary location is on the forward-facing hood lip at the base of the windshield.  Secondary location (35” straight decal) is only to be used when the body design is not produced with a visor. 

 

This is the only banner permitted on the windscreen or lip of the hood.  Dark colored vehicles will use a WHITE decal and light-colored vehicles will use the DARK decal. TITLE sponsor decals are available in 24”, 28” and 35” straight lengths and there is a curved version available in 33.5”.  A 4” black or white vehicle number is located on the left side of the windscreen. 

 

CLASS SPONSORS 

Class sponsors can require 2 supplied stickers. Approximately 170 square inches each. UTV/kart classes will be smaller. 

 

CONTINGENCY SPONSORS 

Racers may run as many or few contingency decals as they desire. Must be neat and grouped all in one area. Rear panel behind rear tire. Front panel behind front tire. Along bottom of body inline with bottom edge/skirting.  
 

IMPORTANT

Displaying of decals as specified in this document is mandatory in order to receive purse payback and manufacturer points. Decals will be supplied at all Series events at Tech and/or Registration. 

decal placement image.bmp